Jul 29, 2015 - In testing Plugable's USB-Ethernet adapters with Windows 10, we were. That will allow Windows Update to download and install the driver.
Update: A Windows 10 driver now exists for the USB2-E1000. However, it will not appear in the CD that comes with the adapter until the next lot of adapters is shipped. The updated driver can be downloaded from this link:. If you are not able to connect to the Internet without installing the driver, you can download it onto a flash drive on another computer and use that to install it. In testing Plugable’s USB-Ethernet adapters with Windows 10, we were happy to discover they all work successfully when their drivers are properly installed. However, an installation problem could cause issues with the. Drivers are already built into Windows 10 for the ASIX AX88772 chip in our and and the ASIX AX88179 chip in our,,.
When you insert these adapters into a USB port, the drivers are automatically installed with no need for an internet connection. However, the driver for the ASIX AX88178 chip in our USB2-E1000 is not pre-installed in Windows 10, and we have discovered a problem with the downloadable driver that keeps it from installing. If this happens, the adapter will show up in Device Manager as “AX88178” with a Code 28 error: “”Drivers for this device are not installed.” There are several ways to work around this issue, depending on the scenario: 1. Upgrading from Windows 7 or Windows 8.1: If you have already installed the driver for the USB2-E1000 in Windows 7 or 8.1 and upgrade directly from that version to Windows 10, the currently installed driver will be available to Windows 10, and your adapter should work without any further effort.
If you haven’t yet installed this driver, please install it before upgrading. The easiest way is to establish an internet connection, either wirelessly or through another Ethernet port, then plug in the USB2-E1000.
Windows Update should see it and automatically download the correct driver. You can also download and install the driver or from the disk that came with your adapter. Doing a clean install of Windows 10 or using the USB2-E1000 on a new Windows 10 computer: Since the previous Windows 7 or 8.1 driver will not be carried over to a clean install of Windows 10, it must be freshly installed. The only way to accomplish this is to have an internet connection available when you first plug in the USB2-E1000. That will allow Windows Update to download and install the driver.
If you are in a situation where this is not possible, we recommend delaying the update until an internet connection is available, or until this issue has been fixed. Currently, the driver on the Plugable and ASIX websites is not working with Windows 10. If you’re a user of a Plugable USB-Ethernet adapter and are experiencing issues, we’re here to help! If support is needed, please run our to collect system logs, and send the resulting file to along with a description of the behavior you’re experiencing and any additional details you feel are relevant. Hi, I would like to do a clean install of Windows 10 on to my new Asus X205TA netbook which only has built in wireless internet adapter – make unknown, but no socket!