Getting the Prolific USB serial adapter working with Windows 8 can be difficult. Especially if you are studying for CCNA and you need to access a 2960G switch on Windows with Putty. As strange as it may look, you need an outdated driver to make it work. The only working version I have found is 3.3.2.102, which you can find at this link: After installing this driver, you need to force this driver version by going to device manager, choose update driver by right clicking on the Prolific adapter, then choose “browse my computer for driver software”, then “let me pick”. On the next window, it should show you different versions of the driver, and you need to choose version 3.3.2.102. This will get the device working on Windows. Prolific driver update.

However, in Linux Mint this is not happening. This list is blank. In terminal if I type lsusb I get Bus 002 Device 007: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port When I do. [ 79.894335] usb 2-2.2: pl2303 converter now attached to ttyUSB0. If it does not, then the driver is not loading properly.

Intellistim be 28e manual free. IntelliSTIM BE-28E EMS Pack includes: TENS/EMS unit, soft carry case, 4 pack of electrodes, 2 lead wires, 2 AA alkaline batteries and instruction manual.

Explorers 1985 film. The characters are divided into good and bad, while monsters are also likewise divided.

The Prolific driver is now configured in Windows 8 Enterprise. Updating the Prolific driver in Device Manager. Now we force the installation of the installed driver and configure our device for use.